Tag
Foot-borne dust and metal particles at the factory entrance reach the printing area. A crawler-type shoe bottom cleaner removes them at the source.
The S-TC100 is an automatic tin slag cleaning machine that removes solder dross from wave soldering pots, protecting wave stability and cutting solder waste.
A solder paste stencil is the most precise tooling on an SMT line — and the easiest thing to neglect. The SCM800 Electric Stencil Cleaning Machine from Southern Machinery runs a fully enclosed, PLC-controlled four-stage
SQC250A PCB surface cleaning machine removes dust, fibers and static before solder paste printing. 250 mm-class specs and checklist from Southern Machinery.
Pre-print PCB surface cleaner with sticky roller and anti-static brush removes dust behind solder paste defects. Inline-ready for EMS and automotive lines.
Remove flux residue from assembled PCBAs with the SME-350MB inline semi-aqueous cleaning machine from Southern Machinery. Conveyor-type, 350mm width.
Remove flux residue from assembled PCBAs with the SME-350MB inline semi-aqueous cleaning machine from Southern Machinery. Conveyor-type, 350mm width.
The SME6200 inline PCBA cleaning machine washes, rinses, and dries circuit boards after reflow or wave soldering, removing flux residue for high-reliability PCB assembly.
Southern Machinery's selective conformal coating machine applies three-proof coating with repeatable film thickness for EMS and automotive PCBA protection.
Dirty pallets, carriers and fixtures quietly transfer flux, grease and dust onto your PCBs — and that contamination shows up later as solder defects, handling marks and rework. The SME-5200 Aqueous Pallet Cleaning System from Southern Machinery (Shenzhen, China; 237+ global customers since 2011) automates the complete wash → rinse → dry cycle in a single machine, so SMT fixtures, pallets, trays, reflow oven coolers and wave-soldering hardware come out clean and dry, ready to return to the line every batch.
Remove flux residue and ionic contamination after wave soldering with the SQC250A PCB cleaning machine. Reliable, cost-effective PCBA production.
The SME-5200 Aqueous Pallet Cleaning System automates wash, rinse and dry cycles for wave solder pallets, reflow fixtures and carriers. Remove flux, grease and dust without hazardous solvents, cut rework, and keep THT tooling rotating through your line.
Automate SMT stencil cleaning with the SME800 electric stencil cleaning machine. Clean solder paste stencils, red glue stencils, and misprinted PCBs in a controlled, repeatable process. Built for EMS factories that need
The S-680A SMT Reel Scrap Tape Cutting Machine from Southern Machinery turns a messy manual chore into a clean, one-step operation. It cuts through carrier tape from 0.05 mm film up to 1.5 mm tape in a single pass — redu
Clean SMT stencils safely with Southern Machinery's S-1688 Pneumatic Stencil Cleaner. It requires no electricity, uses 360° rotating spray rods, and completes a cycle in 3–6 minutes. Built from SUS304 stainless steel wit
