S-6200 Nozzle Cleaning Machine: Protect Pick-Up Rate and Placement Yield
The S-6200 automatic nozzle cleaner uses high-speed hydrodynamic mist to clean mounter nozzles from 01005 to 2.0 mm, using a 24-nozzle jig and DI water—helping protect pick-up rate and placement yield.
Sep 8, 2026 · Updated Sep 8, 2026 · Southern Machinery
S-6200 Nozzle Cleaning Machine: Protect Pick-Up Rate and Placement Yield
Dirty mounter nozzles fail quietly: vacuum drops, parts get skipped, recognition errors push defects into your yield report. The S-6200 automatic nozzle cleaner turns nozzle care into a scheduled routine that protects your pick-up rate and placement yield.
Why Nozzle Cleanliness Drives SMT Yield
Nozzles collect flux residue and solder dust on every cycle. An uncleaned bore makes pick-up unreliable—especially for 01005 and micro-pitch parts, where even a thin residue film can break the vacuum seal. The result: missed pick-ups, recognition errors, rework, scratched tips from manual cleaning, and line-stalling nozzle swaps.
The S-6200 uses hydrodynamic water fragmentation to generate a fine mist at around the speed of sound (≈360 m/s). This high-velocity mist breaks up internal-surface dirt—including residue that ultrasonic cleaners cannot remove—without damaging the nozzle.
What Is the S-6200?
It's a compact, fully automatic cleaning machine that washes and dries mounter nozzles (Fuji, Panasonic, Yamaha, Samsung, Juki, and more) in a single cycle.
Verified Specifications
| Parameter | Spec |
|---|---|
| Air supply | 0.5~0.7 MPa |
| Power supply | AC220V, 1A |
| Cleaning liquid | Purified or DI water |
| Clean / dry time | 3~6 min / 1~3 min |
| Liquid consumption | ≤150 cc/hour |
| Nozzle range | 01005 to Φ2.0 mm |
| Jig capacity | 24 holes |
| Machine size | L665 x W555 x H475 mm |
| Weight | 30 kg |
How It Fits Your Maintenance Routine
Place the S-6200 next to your pick-and-place line. Load the 24-nozzle jig, start the PLC touch-screen cycle, and receive clean, dry nozzles in about 4–9 minutes.
ROI Perspective
- Fewer skipped parts and recognition errors lift first-pass yield.
- Longer nozzle life reduces replacement purchases.
- Eliminates the labor and inconsistency of manual cleaning.
- Low liquid consumption (~150 cc/hour) and automatic discharge support compliance.
About Southern Machinery
Founded in Shenzhen in 2011, Southern Machinery supplies budget-to-midrange SMT/THT automation to more than 237 global EMS, ODM, automotive, medical, and LED customers. Products include insertion, wave soldering, board handling, inspection, cleaning, training, and spare parts.
FAQ
Q: Which nozzles can it clean?
Fuji, Panasonic, Yamaha, Samsung, Juki, and more, ranging from 01005 to Φ2.0 mm. The jig holds 24 nozzles.
Q: What liquid does it use?
Only purified or DI water, with automatic discharge after the cycle.
Q: How long is a cycle?
3–6 minutes of cleaning plus 1–3 minutes of drying—about 4–9 minutes per jig.
Q: Is it better than ultrasonic cleaning?
Yes. The high-momentum mist removes internal-surface dirt that ultrasonic cleaners cannot reach.
Next Steps
- Email: jasonwu@smthelp.com
- WhatsApp: +86 13602562576
- Catalog: https://file.autoinsertion.com
- Images: https://ph.smthelp.com
- Watch: SMT nozzle cleaner improving pick-and-place performance – https://www.youtube.com/watch?v=1_CeplHRQhY
Southern Machinery—Smart EMS factory partner since 2011. 237+ global customers.
Comments