DepanelingEMS ManufacturingLED LightingPCB Assembly AutomationPCB SeparatorSMT LineSouthern MachineryV-Cut
S-D600 Moveable V-Cut PCB Separator by Southern Machinery: Clean Depaneling for LED, SMT and Aluminum Boards
The S-D600 Moveable V-cut PCB Separator from Southern Machinery cleanly separates V-groove panels, LED boards and aluminum substrates with low stress.
Aug 9, 2026 · Updated Aug 9, 2026 · Southern Machinery
# S-D600 Moveable V-Cut PCB Separator by Southern Machinery: Clean Depaneling for LED, SMT and Aluminum Boards
## What Is This Machine Used For?
The **S-D600 Moveable V-cut PCB Separator** is a guillotine-type depaneling machine that separates assembled PCB panels along pre-scored V-grooves. It is used **after** SMT placement, Reflow Oven soldering, THT insertion and Wave Soldering — when a production panel holding multiple boards must be divided into individual PCBA units without damaging components or cracking solder joints.
An operator places the panel on the machine bed, aligns the V-groove under the blade, and activates the cut with a **foot switch**. A stepper-motor-driven upper circular blade presses down against a lower straight blade to break the panel cleanly along the groove. Because separation stress is deliberately kept small, the process avoids the micro-cracking that hand-breaking and manual bending often cause.
**In one sentence:** it converts one assembled multi-up panel into many finished boards, safely and repeatably, at the end of the PCB assembly line.
## Verified S-D600 Technical Specifications
Southern Machinery publishes the following specifications for the S-D600 (source: official product datasheet):
| Parameter | Specification |
| --- | --- |
| Machine size | 950mm × 340mm × 430mm (L×W×H) |
| PCB thickness | 0.2 – 3.0 mm |
| Board feeding speed | 300 – 500 mm/second (switchable) |
| Blade material | SKD61 high-speed steel (SKH-9 imported high-speed steel) |
| Working temperature | 10 – 35 ℃ |
| Storage temperature | -20 – 50 ℃ |
| Power supply | 230V / 110V, 50/60Hz, 40W |
| Machine weight | 40 kg |
| Standard separation length | up to 600 mm, customizable beyond |
| Pre-set cutting travel | 0 / 150 / 300 / 450 / 600 mm |
| Drive | Stepper motor, foot-switch activated |
| Remaining PCB thickness at V-groove | standard 1/3 of PCB thickness (MIN 0.2 mm, MAX 0.8 mm) |
| V-groove depth (C) | MIN 0.25 mm |
| Added external dimension after separation | 0.1 – 0.2 mm |
The blade gap between the upper circular blade and the lower straight blade is adjusted with a simple knob. A protective blade guard and a **safety sensing device** stop the guillotine automatically if hands or foreign objects enter the working area.
## Typical Application Scenarios
### LED Lighting and LED Strips
LED MCPCB panels and aluminum-substrate boards are the most common S-D600 workloads. The machine separates aluminum-core boards along V-grooves with clean edges and without delamination, which is critical for LED module and LED strip production.
### SMT and Mixed-Technology Boards
Any FR4 panel with pre-scored V-grooves — from power supply control boards to appliance main boards — can be separated after Reflow Oven soldering. The low-stress cut protects nearby SMT components and solder joints.
### Aluminum Substrates and Special Materials
The S-D600 is designed for materials that are hard to hand-break: aluminum substrates, thick copper boards, and boards with tight array layouts where manual snapping causes edge damage.
### High-Mix, Low-Volume Depaneling
Because the machine is moveable and does not need to be bolted into a fixed line position, it suits EMS factories that run many small batches and want to share one separator across multiple assembly cells.
## How It Fits into a Complete PCB Assembly Line
The S-D600 belongs at the **end of the line, after soldering and before testing, packing or conformal coating**:
1. **SMT stage** — Solder paste printing, Pick and Place, Reflow Oven.
2. **THT stage** — Auto insertion of radial, axial and odd-form components, then Wave Soldering.
3. **Inspection** — AOI and SPI verification of the assembled panel.
4. **Depaneling** — the S-D600 separates the panel into individual PCBA units.
5. **Downstream** — functional test, cleaning, coating, or packing.
For full-line automation, Southern Machinery can pair the S-D600 with board handling loaders/unloaders, conveyors, and higher-throughput router-type separators (such as the S-D3500S online routing separator) for boards that need contoured cuts rather than straight V-groove separation. Southern Machinery has provided SMT, THT, Wave Soldering, board handling and inspection solutions to 237+ customers worldwide since 2011, and can help you decide which separation method belongs in your line.
## Key Selection Parameters for Buyers
When evaluating a V-cut PCB separator for your factory, confirm these points with the supplier (values shown are the S-D600 datasheet values; your board set may require different figures):
- **PCB thickness range** — must cover your thinnest and thickest boards (S-D600: 0.2 – 3.0 mm).
- **Maximum separation length** — must exceed your longest V-groove cut (S-D600 standard: 600 mm; longer on request).
- **Remaining thickness after cut** — check that the leftover web at the V-groove (standard 1/3 of PCB thickness, MIN 0.2 mm / MAX 0.8 mm for S-D600) matches your board design.
- **Cutting speed and cycle time** — 300 – 500 mm/s for the S-D600; compare against your required throughput.
- **Blade material and service life** — SKD61/SKH-9 high-speed steel on the S-D600; ask about replacement cost and blade lifetime.
- **Safety devices** — blade guard, foot-switch control, and automatic stop sensing.
- **Power and footprint** — 40W, 950×340×430mm, 40 kg on the S-D600; confirm it fits your floor plan.
- **Customization** — longer separation lengths, different blade gaps, or conveyor options.
## ROI, Quality and Throughput Considerations
**Quality:** The biggest hidden cost of manual board separation is cracked solder joints and damaged components that pass initial testing and fail in the field. The S-D600's controlled, low-stress cut reduces this rework and warranty risk.
**Throughput:** A foot-switch-operated guillotine eliminates the inconsistent force of hand-breaking. Operators process panel after panel at a steady pace, and the moveable design means one machine can serve multiple lines instead of idling in a single location.
**Safety:** Integrated safety sensing stops the blade automatically — removing the hand-injury risk associated with manual snapping or unguarded cutting tools.
**ROI:** For a factory separating hundreds of panels per day, the S-D600 typically pays back through reduced rework, fewer rejected edges, and steadier output — before counting the safety and ergonomic benefits.
## FAQ
**What is a V-cut PCB separator used for?**
It divides an assembled PCB panel into individual boards along pre-scored V-grooves, after SMT/THT soldering, without damaging components or cracking solder joints.
**Which materials can the S-D600 separate?**
FR4 SMT boards, LED MCPCB, aluminum substrates, and LED light strips with V-grooves, within a PCB thickness of 0.2 – 3.0 mm.
**What is the maximum separation length of the S-D600?**
600 mm standard; longer separation lengths can be customized for oversized panels.
**Is the S-D600 safe to operate?**
Yes. It uses a foot switch, a protective blade guard, and a safety sensing device that stops the guillotine if hands or foreign objects enter the working area.
**Does the S-D600 need a dedicated line position?**
No. It is a moveable, low-power machine (40W, 40 kg) that can be shared across multiple assembly cells in a smart EMS factory.
**How do I get a quote or configuration advice?**
Contact Southern Machinery (jasonwu@smthelp.com / +86 13602562576) with your board size, V-groove design and target throughput for a recommended configuration.
## Get Configuration Advice from Southern Machinery
Southern Machinery (Shenzhen, est. 2011) supplies SMT/THT PCB assembly automation equipment and full-line solutions to 237+ customers worldwide. For the S-D600 or any other depaneling, board handling or insertion equipment:
- **Email:** jasonwu@smthelp.com
- **Phone/WhatsApp:** +86 13602562576
- **Product catalogs & PDFs:** [file.autoinsertion.com](https://file.autoinsertion.com)
- **Machine photo album:** [ph.smthelp.com](https://ph.smthelp.com)
Watch the moveable V-cut separator in action on the [Southern Machinery YouTube channel](https://www.youtube.com/watch?v=A3osGAyzPgw) — search "Moveable V-cut PCB Separator".
## What Is This Machine Used For?
The **S-D600 Moveable V-cut PCB Separator** is a guillotine-type depaneling machine that separates assembled PCB panels along pre-scored V-grooves. It is used **after** SMT placement, Reflow Oven soldering, THT insertion and Wave Soldering — when a production panel holding multiple boards must be divided into individual PCBA units without damaging components or cracking solder joints.
An operator places the panel on the machine bed, aligns the V-groove under the blade, and activates the cut with a **foot switch**. A stepper-motor-driven upper circular blade presses down against a lower straight blade to break the panel cleanly along the groove. Because separation stress is deliberately kept small, the process avoids the micro-cracking that hand-breaking and manual bending often cause.
**In one sentence:** it converts one assembled multi-up panel into many finished boards, safely and repeatably, at the end of the PCB assembly line.
## Verified S-D600 Technical Specifications
Southern Machinery publishes the following specifications for the S-D600 (source: official product datasheet):
| Parameter | Specification |
| --- | --- |
| Machine size | 950mm × 340mm × 430mm (L×W×H) |
| PCB thickness | 0.2 – 3.0 mm |
| Board feeding speed | 300 – 500 mm/second (switchable) |
| Blade material | SKD61 high-speed steel (SKH-9 imported high-speed steel) |
| Working temperature | 10 – 35 ℃ |
| Storage temperature | -20 – 50 ℃ |
| Power supply | 230V / 110V, 50/60Hz, 40W |
| Machine weight | 40 kg |
| Standard separation length | up to 600 mm, customizable beyond |
| Pre-set cutting travel | 0 / 150 / 300 / 450 / 600 mm |
| Drive | Stepper motor, foot-switch activated |
| Remaining PCB thickness at V-groove | standard 1/3 of PCB thickness (MIN 0.2 mm, MAX 0.8 mm) |
| V-groove depth (C) | MIN 0.25 mm |
| Added external dimension after separation | 0.1 – 0.2 mm |
The blade gap between the upper circular blade and the lower straight blade is adjusted with a simple knob. A protective blade guard and a **safety sensing device** stop the guillotine automatically if hands or foreign objects enter the working area.
## Typical Application Scenarios
### LED Lighting and LED Strips
LED MCPCB panels and aluminum-substrate boards are the most common S-D600 workloads. The machine separates aluminum-core boards along V-grooves with clean edges and without delamination, which is critical for LED module and LED strip production.
### SMT and Mixed-Technology Boards
Any FR4 panel with pre-scored V-grooves — from power supply control boards to appliance main boards — can be separated after Reflow Oven soldering. The low-stress cut protects nearby SMT components and solder joints.
### Aluminum Substrates and Special Materials
The S-D600 is designed for materials that are hard to hand-break: aluminum substrates, thick copper boards, and boards with tight array layouts where manual snapping causes edge damage.
### High-Mix, Low-Volume Depaneling
Because the machine is moveable and does not need to be bolted into a fixed line position, it suits EMS factories that run many small batches and want to share one separator across multiple assembly cells.
## How It Fits into a Complete PCB Assembly Line
The S-D600 belongs at the **end of the line, after soldering and before testing, packing or conformal coating**:
1. **SMT stage** — Solder paste printing, Pick and Place, Reflow Oven.
2. **THT stage** — Auto insertion of radial, axial and odd-form components, then Wave Soldering.
3. **Inspection** — AOI and SPI verification of the assembled panel.
4. **Depaneling** — the S-D600 separates the panel into individual PCBA units.
5. **Downstream** — functional test, cleaning, coating, or packing.
For full-line automation, Southern Machinery can pair the S-D600 with board handling loaders/unloaders, conveyors, and higher-throughput router-type separators (such as the S-D3500S online routing separator) for boards that need contoured cuts rather than straight V-groove separation. Southern Machinery has provided SMT, THT, Wave Soldering, board handling and inspection solutions to 237+ customers worldwide since 2011, and can help you decide which separation method belongs in your line.
## Key Selection Parameters for Buyers
When evaluating a V-cut PCB separator for your factory, confirm these points with the supplier (values shown are the S-D600 datasheet values; your board set may require different figures):
- **PCB thickness range** — must cover your thinnest and thickest boards (S-D600: 0.2 – 3.0 mm).
- **Maximum separation length** — must exceed your longest V-groove cut (S-D600 standard: 600 mm; longer on request).
- **Remaining thickness after cut** — check that the leftover web at the V-groove (standard 1/3 of PCB thickness, MIN 0.2 mm / MAX 0.8 mm for S-D600) matches your board design.
- **Cutting speed and cycle time** — 300 – 500 mm/s for the S-D600; compare against your required throughput.
- **Blade material and service life** — SKD61/SKH-9 high-speed steel on the S-D600; ask about replacement cost and blade lifetime.
- **Safety devices** — blade guard, foot-switch control, and automatic stop sensing.
- **Power and footprint** — 40W, 950×340×430mm, 40 kg on the S-D600; confirm it fits your floor plan.
- **Customization** — longer separation lengths, different blade gaps, or conveyor options.
## ROI, Quality and Throughput Considerations
**Quality:** The biggest hidden cost of manual board separation is cracked solder joints and damaged components that pass initial testing and fail in the field. The S-D600's controlled, low-stress cut reduces this rework and warranty risk.
**Throughput:** A foot-switch-operated guillotine eliminates the inconsistent force of hand-breaking. Operators process panel after panel at a steady pace, and the moveable design means one machine can serve multiple lines instead of idling in a single location.
**Safety:** Integrated safety sensing stops the blade automatically — removing the hand-injury risk associated with manual snapping or unguarded cutting tools.
**ROI:** For a factory separating hundreds of panels per day, the S-D600 typically pays back through reduced rework, fewer rejected edges, and steadier output — before counting the safety and ergonomic benefits.
## FAQ
**What is a V-cut PCB separator used for?**
It divides an assembled PCB panel into individual boards along pre-scored V-grooves, after SMT/THT soldering, without damaging components or cracking solder joints.
**Which materials can the S-D600 separate?**
FR4 SMT boards, LED MCPCB, aluminum substrates, and LED light strips with V-grooves, within a PCB thickness of 0.2 – 3.0 mm.
**What is the maximum separation length of the S-D600?**
600 mm standard; longer separation lengths can be customized for oversized panels.
**Is the S-D600 safe to operate?**
Yes. It uses a foot switch, a protective blade guard, and a safety sensing device that stops the guillotine if hands or foreign objects enter the working area.
**Does the S-D600 need a dedicated line position?**
No. It is a moveable, low-power machine (40W, 40 kg) that can be shared across multiple assembly cells in a smart EMS factory.
**How do I get a quote or configuration advice?**
Contact Southern Machinery (jasonwu@smthelp.com / +86 13602562576) with your board size, V-groove design and target throughput for a recommended configuration.
## Get Configuration Advice from Southern Machinery
Southern Machinery (Shenzhen, est. 2011) supplies SMT/THT PCB assembly automation equipment and full-line solutions to 237+ customers worldwide. For the S-D600 or any other depaneling, board handling or insertion equipment:
- **Email:** jasonwu@smthelp.com
- **Phone/WhatsApp:** +86 13602562576
- **Product catalogs & PDFs:** [file.autoinsertion.com](https://file.autoinsertion.com)
- **Machine photo album:** [ph.smthelp.com](https://ph.smthelp.com)
Watch the moveable V-cut separator in action on the [Southern Machinery YouTube channel](https://www.youtube.com/watch?v=A3osGAyzPgw) — search "Moveable V-cut PCB Separator".
Comments